BTY 690.30.1 "AURA": Barnstorming Bionic Butterfly Pulls Off a Perfect Flat Spin! 21.07.2026.
Meet AURA — a custom-built, micro robotic bionic RC butterfly! 🦋 Unlike traditional RC planes with propellers, AURA is a biomimetic ornithopter that flies entirely by flapping its wings. It features a fully manual control system, meaning there are no gyros or stabilization systems onboard. How does it work? The heartbeat of AURA is the Raspberry Pi RP2040-Zero controller running a custom code (AURA_v7.33). When I move the transmitter sticks, the microcontroller executes specific custom-programmed flapping algorithms to perform the commands in real-time. It’s a pure, hands-on piloting experience combined with bio-inspired robotics! Highlight of the flight: Watch closely as AURA climbs to the ceiling, slows down to a complete stop, and enters a stunning 360-degree flat spin! By changing the angle of attack on each wing (one positive, one negative), it perfectly mimics a falling maple seed while remaining parallel to the ground. It’s a pure barnstorming trick executed entirely through manual control algorithms! 🛠️ Full Specs & Hardware: • Wingspan: 690mm • Flying Weight (AUW): 40g • Code / Sketch: AURA_v7.33 • Flight Controller: Raspberry Pi RP2040-Zero • Servo Step-Up Voltage Regulator: eletechsup ND0412SA 6V • FC Step-Up Voltage Regulator: Pololu U1V10F5 5V 1.2A • Receiver (RX): OrangeRx R616XN • Battery: GNB LiHv 1S 300mAh 4.35V (1S1P) • Servos: 2x BlueArrow AF D43S-6.0 MG • Transmitter (TX): RadioMaster TX16S MKII MAX 4-in-1 (EdgeTX v2.10.5 "Centurion")
Название:
BTY 690.30.1 "AURA": Barnstorming Bionic Butterfly Pulls Off a Perfect Flat Spin! 21.07.2026.
Категория:
Культура